CISCO CATALYST 9130 SERIES ACCESS POINT

– and BLE/IoT

Categories: ,

– Four radios: 2.4 GHz (4×4) 5 GHz (8×8 and 4×4) Cisco RF ASIC- and BLE/IoT- Cisco Flexible Radio Assignment and Cisco CleanAir Technology- Internal and external antenna- WiFi 6 certified- Software: Catalyst 9130 AXI: Cisco Unified Wireless Network Software Release 8.10.x or later- Cisco IOS XE Software Release 16.12.1 with AP Device Pack or later- Catalyst 9130AXE: Cisco Unified Wireless Network Software Release 8.10MR1 or later- Cisco IOS XE Software Release 17.1.1 s or later- Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers- Cisco 3504 5520 and 8540 Wireless Controllers and Cisco Virtual Wireless Controller- 802.11n version 2.0 (and related) capabilities- 4×4 MIMO with four spatial streams- Maximal Ratio Combining (MRC)- 802.11n and 802.11a/g- 20- and 40 MHz channels- PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)- Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive) Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)- 802.11 Dynamic Frequency Selection (DFS)- Cyclic Shift Diversity (CSD) support- 802.11ac- 8×8 downlink MU-MIMO with eight spatial streams- MRC- 802.11ac beamforming- 20- 40- 80- and 160-MHz channels- PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz)- Packet aggregation: A-MPDU (transmit and receive) A-MSDU (transmit and receive)- 802.11 DFS- CSD support- WPA3 support- 802.11ax- 8×8 uplink/downlink MU-MIMO with eight spatial streams- Uplink/downlink OFDMA- TWT- BSS coloring- MRC- 802.11ax beamforming- 20- 40- 80- and 160-MHz channels- PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)- Packet aggregation: A-MPDU (transmit and receive) A-MSDU (transmit and receive)- 802.11 DFS- CSD support- WPA3 support- System memory: 2048 MB DRAM 1024 MB flash- Interfaces- 1x 100 1000 2500 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az- Management console port (RJ-45)- USB 2.0 at 4.5W (enabled via future software)- Dimensions (W x L x H)- Access point (without mounting brackets):- C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)- C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)- Weight: Cisco Catalyst 9130AXI 3.2 lb. (1.45 kg)- Cisco Catalyst 9130AXE 3.78 lb. (1.71 kg)- Warranty: Limited lifetime hardware warranty

Reviews

There are no reviews yet.

Be the first to review “CISCO CATALYST 9130 SERIES ACCESS POINT”

Your email address will not be published. Required fields are marked *

Shopping Cart